Product Description
Honeywell North Butyl Smooth Gloves 7 mil, M, size 8, EA
These 7 mil, 14" Butyl gloves are a perfect inner glove when used in conjunction with a 15 mil Nitrile glove. These unsupported, Butyl gloves have a sanitized interior, smooth finish, and a rolled bead cuff. They are manufactured to the requirements of MIL - DTL - 43976D Type III.
Butyl has the highest permeation resistance to gas and water vapor, highly resistant to ketones (MEK, MIBL, acetone) and esters (tricresyl phosphate, amyl acetate, ethyl acetate). Not recommended for protection against petroleum or ther hydrocarbons.
- 7 mil, Butyl gloves
- Length: 14"
- Smooth finish for tactile quality
- Available in sizes: M (8), L (9) and XL (10)
- Meet the following regulations:
- ANSI/ISEA 105 - ASTM D3389-05 Abrasion Test
- ANSI/ISEA 105 - ASTM F1790-97 Cut Test
- EN374 - Permeation and breakthrough time
- EN388 - Mechanical risks from abrasion, cut, tear and puncture
- EN420 - General Requirements - This standard defines the general requirements for protective gloves in terms of construction, fitness of purpose and safety
- OSHA Standard - CFR 1915.157 - The employer shall ensure that each affected employee uses appropriate hand protection and other protective clothing where there is exposure to hazards such as skin absorption of harmful substances, severe cuts or lacerations, severe abrasions, punctures, chemical burns, thermal burns, harmful temperature extremes, and sharp objects.
-
